Anaerobic Sealant Anaerobic Gasket Sealant, 850 mL, Purple, Temp Range up to 300 Degrees F
Web Price
$521.29
/ each
Product Details
Apply a Continuous Bead of Product and Assemble the Mating Parts without Excessive Lateral Movement. Remove Excessive Contamination Such as Grease, Heavy Oils, and Dirt with Cleaning Solvent 7070 for Best Results.
Partial Cure is Obtained in 4 hr
LOCTITE
Eliminates most cut gaskets. Improves flange sealing reliability by overcoming problems associated with pre-cut gaskets and other formed-in-place gaskets. Anaerobic, ready-to-use gel-like material cures at room temperature. While uncured, product provides instant-seal properties for low-pressure production line testing.
Methacrylate Ester
Purple
Purple
Metal
Gel
28.74 fl oz
28.74 fl oz Cartridge
Over 16.1 oz
Cartridge
United States
Anaerobic
Fills Gaps Up to 0.050 in When Used On Active Metals with Loctite(R) 7649(TM) Primer N
199.4 Degrees F
Aluminum, Steel
48 hr
2 day
0.05 in
150 Degrees C
1,700,000 cps
Above -29 Degrees F
-10 Degrees C
150,000 cps
-10 Degrees C to 150 Degrees C
1 EA
1
Gel
California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA
Gasket Sealant
1,000 psi
850 mL
1.1
Axle Covers, Compressors, Pumps, Thermostats, Transmission Housings
California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA Section 302 EHS, CERCLA/SARA Section 311/312, CERCLA/SARA Section 313, OSHA 29 CFR 1910.1200, TSCA
8 Degrees to 21 Degrees C
Metal-to-Metal Assemblies
up to 300 Degrees F
14 N/sq mm
Anaerobic Sealant
Thixotropic Paste
134 g/L
More Than 100 g/L
30 min
6 min to 30 min
Viewed together
Fiberglass Fabric, 18 ft L, 10 in W, 0.006 in Thick, Silicone Adhesive Backing, Tan
$259.73 / each
Web price
Fiberglass Fabric, 54 ft L, 1 in W, 0.014 in Thick, Silicone Adhesive Backing, Tan
$173.15 / each
Web price